Includes

• 1 x MAKITA 18V Hammer Drill Skin DHP482Z
• 1 x MAKITA 18V 1/4inch Impact Driver Skin DTD152Z
• 2 x MAKITA 18V 3.0Ah Lithium-Ion Battery BL1830B-L
• 1 x MAKITA 7.2V - 18V Lithium-ion Battery Charger DC18SD

MAKITA 18V Hammer Drill Skin DHP482Z

The new Makita DHP482Z is a compact 18V Hammer Driver Drill to replace its predecessor DHP456Z. Comparing the two models, the new DHP482Z is more compact in size and has a higher fastening torque. The DHP482Z Hammer Driver Drill is designed to suit the needs of all trades people that require a compact 18V tool for drilling and fastening.

• Mechanical 2 speed gearing selection switch located at the top of the tool allows high or low speed to be selected
• Single Sleeve keyless chuck allows for easy bit installation and removal with one hand
• Twin LED Joblight pre glow and after glow function, illuminates more widely then single LED
• Compact overall length has been reduced to 198mm increasing the maneuverability of the tool
• All metal gear construction increases the durability of the transmission
• Ergonomically designed handle has been designed for maximum thrust to the bit with soft grip for comfort
• XPT eXtreme Protection Technology encasing the electrical components for increased protection against dust and water

Specifications

• Voltage: 18V
• Capacities:
• Steel: 13mm
• Wood: 38mm
• Masonry: 13mm
• No load speed:
• Hi: 0-1900rpm
• Lo: 0-600rpm
• Impact rate:
• Hi: 0-28,500ipm
• Lo: 0-9000ipm
• Max fastening torque:
• Hard: 62Nm
• Soft: 36Nm
• Length: 198mm
• Weight: 1.8kg

MAKITA 18V 1/4inch Impact Driver Skin DTD152Z

• One touch bit installation
• LED Joblight
• Ergonomically designed grip
• XPT - eXtreme Protection Technology
• Aluminium hammer case
• Impact Rate: 0-3,500ipm
• Max Fastening Torque: 165Nm
• No Load Speed: 0-2,900rpm

MAKITA 18V 3.0Ah Lithium-Ion Battery BL1830B-L

• Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
• Fast 22 minute charging time
• Battery delivers consistent power and run time in extreme temperatures, even in winter (-20?C)
• Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
• Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
• Battery resists self-discharge and remains ready for use even after long periods of storage
• Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
• Star protection computer controls - includes overload protection, over-discharge protection and over heat protection
• The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
• If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating

MAKITA 7.2V - 18V Lithium-ion Battery Charger DC18SD

• Digital power display indicates charging level
• More cost effective option
• Optimum charging system to maximise cycle life and work volume
• Charge Time:
  • 30mins (Compact)
  • 60mins (3.0Ah)