Includes

• RAZOR COMPACT 250 Welder
• 4m M24 Digital MIG Torch
• 4m Twist Lock Electrode Holder
• 4m 300 Amp Earth Clamp & Lead
• Twin Gauge Argon Regulator
• 1.8m Gas Hose with fittings
• Operating Manual
• 0.8-0.9mm V Groove Roller
• 0.8-0.9mm F Groove Roller
• 1.0-1.2mm U Groove Roller

Get superior MIG, TIG & STICK performance even in the toughest conditions with the professional machine in a compact case.

Quick and easy setup with synergic MIG programs
Spool gun and Push-Pull gun compatible for the best aluminium welds
4 geared wire drive system for the ultimate wire feeding experience
A 5-year warranty to reflect our confidence in this machine

• HD Backlit Interface
  This next generation interface panel is bright and easy to read in any environment.
• Synergic MIG Control
  Getting set up for a weld has never been faster with our preset synergic programs. Simply select your wire type, wire size, gas type and material thickness, and the machine does the rest. It?ll pick the optimal settings for your weld.
• Multi-Process Welding
  Get the job done quickly and efficiently with our versatile three-in-one welding machine. With the ability to perform MIG, TIG, and STICK welding all in one unit, you can save valuable time and effort without sacrificing quality.
• Digital Control MIG Torch
  Our digital MIG torch allows you to adjust your settings on the fly. No more hassle of constantly adjusting your settings on a separate control panel. With our leading technology, you can easily fine-tune the amps, current and voltage at the touch of a torch button.
• Spool Gun Ready
  Make welding aluminium even easier. No need to change your existing setup. The spool gun lets you quickly switch over and get any job done with no downtime.
• Gas & Gasless MIG
  Capable of running both gas-shielded and gasless MIG wire, you can to tackle a wide variety of welding projects with ease. Whether you?re working with mild steel, stainless steel, aluminium, or flux-cored wire, our machine has got you covered.
• Geared Wire Drive
  The most consistent and smoothest wire-feeding experience there is. With a four geared wire drive unit, there?s more power pushing the wire, improving the wire feeding, especially in longer torches.
• Trigger Controlled DC Lift Arc TIG
  The Trigger Controlled DC Lift Arc ignition allows the arc to be started easily in DC TIG by simply touching the tungsten to the workpiece and lifting it up to start the arc. This stops the tungsten tip sticking to the workpiece and breaking the tip from the tungsten electrode.
• Advance MMA Features
  This machine features Anti-Stick technology, as well as adjustable Arc Force and Hot Start functionality. These features are designed for improving weld quality and ease of use.
• 
  Smart Fan
  Smart Fan diminishes noise, saves power, helps reduce energy costs, and minimises the number of contaminants being pulled through the machine.
• Power Factor Correction (PFC)
  Get the most out of your machine. The PFC maximises the electrical efficiency of the machine and automatically compensates for any voltage fluctuations, so you get more output power and the internal components last longer.
• Push-Pull Gun Ready
  Achieve smooth and steady wire feeding, especially when using softer wires such as aluminium. With a ?Pull? motor built into the torch, the wire can be fed over a greater distance, granting you the freedom to move and manoeuvre with ease while MIG welding.

Machine Specifications

• Primary input voltage: 240V Single Phase
• Supply plug: 15 AMP
• Ieff (A): 15.0
• Rated output: 30A/15.5V - 250A/26.5V
• No load voltage (V): 65
• Protection class: IP23S
• Insulation class: H
• Minimum generator (kVA): 11.0
• Dinse connector: 35/50
• Standard: AS/NZ60974-1
• Suitable material
  MIG: Mild Steel, Stainless Steel, Aluminium, Silicon Bronze / MMA: Mild Steel, Stainless Steel, Cast Iron / TIG: Mild Steel, Stainless Steel, Copper, Silicon Bronze

Warranty

UNIMIG is pleased to offer a 5-year warranty on the RAZOR COMPACT 250*.

UNIMIG offers warranty across Australia with four UNIMIG service centre?s in Sydney, Melbourne, Brisbane & Perth. We also have authorised service centres across Australia as well. UNIMIG?s focus is to assure the buyer is getting reliability, performance and peace of mind with a quality product.

UNIMIG also offers an additional 6 months warranty free of charge when you register your product online via the UNIMIG website.

*Please note warranty only applies to the power source only

MIG Specifications

• MIG Welding current range: 30-250A
• MIG Duty cycle @ 40?C: 20% @ 250A / 60% @ 144A / 100% @ 112A
• MIG Wire size range: 0.6-1.2mm
• MIG Wire spool size: 5kg / 15kg
• MIG Welding thickness range: 1-12mm
• Drive roller size: 30/22 (x2)

TIG Specifications

• TIG Function type: Trigger Controlled DC Lift Arc
• TIG Welding current range: 5-250A
• TIG Duty cycle @ 40?C: 20% @ 250A / 60% @ 144A / 100% @ 112A
• TIG Welding thickness range: 1-10mm

Stick Specifications

• Stick welding current range: 20-220A
• Stick duty cycle @ 40?C: 20% @ 220A / 60% @ 127A / 100% @ 98A
• Stick electrode range: 2.5-4.0mm
• Stick welding thickness range: 2-12mm

Machine features

• Wire drive: 4 Geared
• VRD: Yes
• Spool gun connection: Yes
• Foot control connection: Yes
• Burnback adjustment: Yes
• Wire inch: Yes
• Inductance control: Yes
• Thermal overload protection: Yes