The ultimate DIY multi-process welder, the VIPER MULTI 135 is perfect for those weekend projects.

Synergic MIG controls for quick and easy weld setups
3-in-1 multi-process machine so you can MIG, TIG & STICK
10 amp plug, so you can use it with any domestic outlet

• SYNERGIC MIG CONTROL
  The clever Synergic MIG control takes the guesswork out of your settings. Simply select your wire size and adjust the Synergic power knob to the thickness of your material. The program works with 0.6, 0.8 and 0.9mm mild steel, stainless steel & flux-cored wires.
• 10 AMP PLUG
  Plug in and play. A 10 AMP power plug can be used on any domestic outlet. It?s perfect for the DIY home handyman or the professional welder looking for a machine that can be used almost anywhere.
• GAS & GASLESS MIG
  This machine supports both gas-shielded MIG and gasless MIG wire, meaning you can easily run mild steel, stainless steel & flux-cored MIG wire.
• LIGHTWEIGHT & PORTABLE
  Weighing just over 5kg, the VIPER MULTI 135 is ready to go anywhere you need it. Also included is a shoulder strap for extra comfort and portability.
• Multi-Process Welding
  This three-in-one machine, lets you perform MIG, TIG and STICK welding all on one machine. There is no need to swap between machines, saving you time and setup.

Includes

• VIPER MULTI 135 MIG/TIG/STICK Welder
• 2m Direct Connect MIG Torch
• 2m Earth Clamp & Lead
• Electrode Holder
• 2m Gas Hose Complete with fittings
• 1kg E71T-GS 0.8mm Gasless Wire
• Operating Manual

Machine Specifications

• Primary input voltage: 240V Single Phase
• Supply plug: 10 AMP
• Rated input power (kVA): 4.15
• Ieff (A): 8.4
• Rated output: 40/16V-135A/21V
• No load voltage (V): 68
• Protection class: IP21S
• Insulation class: H
• Power factor: 0.68
• Minimum generator (kVA): 8.0
• Dinse connector: 10/25
• Standard: AS/NZ60974-1
• Suitable material: Mild Steel, Stainless Steel, Cast Iron, Silicon Bronze, Copper

Warranty

UNIMIG is pleased to offer a 2 year warranty on the VIPER MULTI 135*.

UNIMIG offers warranty across Australia with four UNIMIG service centre?s in Sydney, Melbourne, Brisbane & Perth. We also have authorised service centres across Australia as well.UNIMIG?s focus is to assure the buyer is getting reliability, performance and peace of mind with a quality product.

UNIMIG also offers an additional 6 months warranty free of charge when you register your product online via the UNIMIG website.

*Please note warranty only applies to the power source only

MIG Specifications

• MIG Welding current range: 40-135A
• MIG Duty cycle @ 40?C: 15% @ 135A, 60% @ 65A, 100% @ 50A
• MIG Wire size range: 0.6-0.9mm
• MIG Wire spool size: 1kg
• MIG Welding thickness range: 1-6mm

TIG Specifications

• TIG Function type: DC Lift Arc
• TIG Welding current range: 20-120A
• TIG Duty cycle @ 40?C: 15% @ 120A, 60% @ 60A, 100% @ 45A
• TIG Welding thickness range: 1-6mm

Stick Specifications

• Stick welding current range: 20-120A
• Stick Duty cycle @ 40?C: 15% @ 120A, 60% @ 60A, 100% @ 45A
• Stick Electrode range: 2.5-3.2mm
• Stick Welding thickness range: 1-6mm

Machine Features

• Wire Drive: Standard
• VRD: Yes
• Thermal overload protection: Over Temperature Warning